Visit the Below Website to access unlimited exam questions for all IT vendors and Get Oracle Certifications for FREE
http://www.free-online-exams.com
http://www.free-online-exams.com
Exin TMPF TMap Next Foundation
See the next post for the rest of the exam questions
Email me on ayman.rayyan@hotmail.com for the LATEST pdf/word version of the questions
QUESTION NO: 1
See the definition below:
Tests in which the supplying party demonstrates that the product particularly meets the functional
and non-functional specifications and the technical design, among other things.
Of which test level is this the definition?
A. acceptance test
B. development test
C. system test
Answer: C
QUESTION NO: 2
In which Map phase activity does the pre-test take place?
A. Defining central starting points
B. Intake of the test object
C. Specifying the test object intake
D. Executing (re)tests
Answer: B
QUESTION NO: 3
Which defect has an internal cause that can be solved within the test team?
A. a defect in the test basis
B. a defect in the test specification
C. a defect in the test object
Answer: B
QUESTION NO: 4
Under which circumstance can Exploratory Testing be used effectively?
A. when experienced testers with domain knowledge are available
B. when testing must be as brief as possible on the critical path of the project
C. when critical functionality, failure of which can cause severe damage, must be tested
2
Answer: A
QUESTION NO: 5
What is not an advantage of applying a test design technique and recording it in the test
specifications?
A. that the tests are reproducible
B. that the test specifications are transferable
C. that coverage of 100% is achieved
D. that it provides a justified elaboration of the test strategy
Answer: C
QUESTION NO: 6
See the illustration below:
To test a registration application for a weekend trip, logical test cases must be created in
accordance with the Data Combination Test. In addition, it has been agreed that less depth testing
must be performed. One data pair has been defined that must be fully tested in combination:
* car - attraction
Eight test cases are designed using a classification tree.
3
Where must the 'bullets' for test case 4 be placed?
A. Saturday, fun park, 2nd
B. Sunday, museum, station
C. Sunday,fun park, station
Answer: C
QUESTION NO: 7
A structured testing approach is characterized by:
* providing concrete footholds
* covering the full scope and describing the complete range of relevant aspects
* providing a structure, so that it is clear what exactly by whom, when and in what sequence has to
be done
What is the fourth characteristic?
A. it delivers insight into and advice on any risks in respect of the quality of the tested system
B. managing test activities in the context of time, money and quality
C. the testing is on the critical path of the total development, as briefly as possible, so that the total
lead time of development is shortened
D. to find defects at an early stage
Answer: B
QUESTION NO: 8
During the Process Cycle Test, the coverage type paths is used. In which way can coverage be
varied here?
A. by using boundary values
B. by using a higher or lower test depth level
C. by taking equivalence classes into consideration
Answer: B
QUESTION NO: 9
Which activity is not part of the Completion phase?
4
A. updating thetestware to be preserved
B. assessing test results
C. evaluating the test process
D. selecting thetestware to be preserved
Answer: B
QUESTION NO: 10
Which type of tool is used in the Execution phase to test a module or component that has a
relationship with programs that have not yet been realized?
A. code coverage tool
B. comparator
C. 'model-based testing' tool
D. stubs and drivers
Answer: D
QUESTION NO: 11
For the creation of the central starting point there are several techniques. In the given situation it is
necessary that consistency between the data entered is guaranteed. Which of the techniques
below is preferable if only one technique may be used?
A. use of production data
B. entering through separate front-end software
C. entering through regular system functions
Answer: C
QUESTION NO: 12
See the definition below: The ease with which the information system can be adapted to new
requirements of the user and the changing external environment, or to correct errors. Of which
quality characteristic is this the definition?
A. manageability
B. flexibility
C. maintainability
5
Answer: C
QUESTION NO: 13
See the decision and test situations below:
R = (A AND B) OR C
Which test situation is missing if the coverage type decision points modified condition/decision
coverage is used?
A. Option A
B. Option B
Answer: B
QUESTION NO: 14
See the specification below in which a decision point is described:
R = (D OR E) AND F
Use of the coverage type decision points modified condition/decision coverage produces the
following table with test situations:
Which values are missing where the dots are stated (? to make the table complete?
A. 010
6
B. 011
C. 110
D. 111
Answer: B
QUESTION NO: 15
See the specification of a discount campaign below:
How many equivalence classes can be distinguished from the above specification?
A. 3
B. 4
C. 5
Answer: B
QUESTION NO: 16
The specification of test cases according to a test design technique follows five general steps.
Which step is stablishing the starting point?Which step is ?stablishing the starting point?
A. step 2
B. step 3
C. step 4
D. step 5
Answer: C
QUESTION NO: 17
See the illustration below:
7
Which test situations can be differentiated when the coverage type paths test depth level 2 is
used?
A. 1-2; 2-3; 3-4; 2-4; 2-5; 2-6; 3-5; 3-6; 4-5; 4-6; 5-6
B. 1-2; 1-3; 1-4; 2-5; 3-5; 4-5; 2-6; 3-6; 4-6
C. 1-2-5; 1-2-6; 1-3-6; 1-3-5; 1-4-6; 1-4-5
Answer: B
QUESTION NO: 18
Which system development method is agile and contains structured guidelines for development
testing?
A. DSDM
B. SDM
C. XP
Answer: C
8
QUESTION NO: 19
See the illustration below:
What is the minimum number of logical test cases generated by the use of the Process Cycle Test
if the coverage type paths test depth level 2 is used?
A. 3
B. 5
C. 6
D. 9
Answer: C
QUESTION NO: 20
The test infrastructure consists of facilities and resources required to conduct testing effectively.
Which facility does not belong to the testing infrastructure?
A. test environments
B. test design techniques
9
C. test tools
D. workplaces
Answer: B
QUESTION NO: 21
See the specification below:
IF A AND (B OR C)
THEN error message
ENDIF
How many logical test cases are distinguished if Semantic Testing with coverage type decision
points condition/decision coverage is used?
A. 2
B. 3
C. 4
D. 8
Answer: A
QUESTION NO: 22
What can be avoided by consolidating separate checklists into one checklist for assessing a test
basis?
A. finding the same test basis defect more often
B. using a particular checklist in both the acceptance and system tests
C. that every project compiles its own checklist
D. duplicating work on identical parts of the test basis during the evaluation
Answer: D
QUESTION NO: 23
Which test design technique uses operational profiles and load profiles?
A. Data Cycle Test
B. Process Cycle Test
C. Real-Life Test
10
D. Use Case Test
Answer: C
QUESTION NO: 24
What is the aim of the activity 'assessing the test basis'?
A. to determine the risk of the various system components
B. to select the most suitable test design techniques
C. to determine whether the delivered system components can be tested in a useful manner
D. to establish the testability of the test basis
Answer: D
QUESTION NO: 25
What is not one of the aims of the 'testability review test basis' report?
A. providing feedback on the quality of the test basis and its impact on the planned test procedure
B. gaining an insight into the estimation for the test procedure
C. obtaining information on project risks
D. discussing the weak spots in the system design on time
Answer: B
QUESTION NO: 26
Three parameters play a role for a printing function and for every parameter there are two
equivalence classes to be tested:
Which combination is missing in the table if the coverage type pairwise testing is applied?
11
A. arial color 10
B. arial black 12
C. verdana color 10
D. verdana black 10
Answer: C
QUESTION NO: 27
Which of the following statements about 'evaluation' is correct?
A. evaluation relates to the left-and and right-hand side of the V model
B. evaluation is the review of end products
C. evaluation applies to incremental and iterative system development methods
Answer: C
QUESTION NO: 28
With which step in the business driven test management (BDTM) approach follows the step
etermining risk class?With which step in the business driven test management (BDTM) approach
follows the step ?etermining risk class?
A. determining light/thorough testing
B. formulating the assignment and gathering test goals
C. creating test cases
D. allocating test techniques
Answer: A
QUESTION NO: 29
With which units do you best start the unit integration test?
A. the units that are ready first
B. the units that are the worst (least) documented
C. the units in which the most problems are expected
Answer: C
12
QUESTION NO: 30
What is not a test benefit?
A. facilitating good project control by providing information
B. avoiding repair costs and consequential loss in the production situation
C. avoiding damage during production
D. release of a product
Answer: D
QUESTION NO: 31
What is not a general step when specifying test cases?
A. allocating the test techniques
B. identifying test situations
C. creating the test script
D. establishing the starting point
Answer: A
QUESTION NO: 32
What constitutes a good test environment?
A. it is possible to adequately determine to what extent the test object meets the requirements
B. it has been configured and tested by qualified personnel
C. it meets both of the requirements listed above
D. it is as similar to the production environment as possible and the test data is consistent
Answer: A
QUESTION NO: 33
See the figure below:
13
Of which test design technique is this an example?
A. Data Combination Test
B. Data Cycle Test
C. Semantic Test
D. Syntactic Test
Answer: D
QUESTION NO: 34
A fun park is celebrating its 25th birthday and has come up with the following discount campaign:
Everybody is given 50% discount on their admission ticket. Children younger than 4 years, adults
older than 64 years, and for this special occasion adults aged 25 years will be allowed in free.
How many equivalence classes are included in this situation?
A. 3
B. 4
C. 5
Answer: C
QUESTION NO: 35
What is recorded in a test plan?
A. the initial situation, action and predicted result
B. the test situations to be tested
C. the division into test units and the test techniques to be used
D. a stepped plan for the test execution
Answer: C
14
QUESTION NO: 36
See the specification below:
How many logical test cases can be generated if a semantic test using the coverage type decision
points modified condition/decision coverage is used?
A. 1
B. 2
C. 3
D. 4
Answer: C
QUESTION NO: 37
Which activity takes place in the Preparation phase?
A. the test object intake
B. allocating test units and test techniques
C. determining the test basis
D. collection of the test basis
Answer: D
QUESTION NO: 38
What strongly benefits the quality characteristic 'testability'?
A. the ease of operation of the system by the end-users
B. the ease with which an interface can be created with another information system
C. the ease with which the information system can be placed and maintained in an operational
condition
D. having a regression test and othertestware
Answer: D
QUESTION NO: 39
15
What is to be preserved in the activity reserving the testware? What is to be preserved in the
activity ?reserving the testware?
A. alltestware created during the project
B. a selection of thetestware in consultation with the future administrator
Answer: B
QUESTION NO: 40
What is an advantage of the BDTM approach?
A. a test process that can be controlled by the client
B. a cheaper test process
C. a risk-free production launch of the tested system
Answer: A
QUESTION NO: 41
What is not an element of a test case in relation to the system behavior to be tested?
A. action
B. defect
C. initial situation
D. predicted result
Answer: B
QUESTION NO: 42
Drivers can be used in the Execution phase of a test process. What are drivers for?
A. to test, at an early stage, a module that has relationships with modules not yet realized
B. to gain insight into aspects like memory use, CPU use, network load and performance
C. to determine whether the system continues to function correctly and at the required speeds
under the expected production load
Answer: A
16
QUESTION NO: 43
Problems can be prevented by looking closely at the way the starting point for the test execution
must be structured and which process must be deployed when using it. Which problem does this
not prevent?
A. production disruptions
B. a deteriorating starting point
C. testing gets increasingly expensive
Answer: A
QUESTION NO: 44
See the following specification:
How many test situations are produced when the coverage type decision points condition/decision
coverage is used?
A. 2
B. 3
C. 4
D. 8
Answer: C
QUESTION NO: 45
See the specification below:
17
Apply the Decision Table Test to the above specification. When doing this, use the coverage type
multiple condition coverage. How many logical test cases result in an error message?
A. 1
B. 2
C. 3
D. 4
Answer: B
QUESTION NO: 46
What is the definition of valuation?What is the definition of ?valuation?
A. Evaluation gives insight in the actual and future status of the end product.
B. Evaluation is a process that gives insight into and advice on quality and related risks.
C. Evaluation is assessing the interim products in the system development process.
Answer: C
QUESTION NO: 47
Which defects can be detected more effectively with development tests than with system and/or
acceptance tests?
A. defects related toeffectivity
B. defects related to the database and/or the operating system
C. defects related to the functional specifications
D. defects related to performance
Answer: B
18
QUESTION NO: 48
What is the aim of a unit test?
A. to demonstrate that a unit meets the functional specifications
B. to demonstrate that a unit meets the technical specifications
C. to demonstrate that a unit integrates properly with other units
Answer: B
QUESTION NO: 49
Is the checklist created to determine the test basis dependent on the selected test design
technique?
A. yes
B. no
Answer: A
QUESTION NO: 50
See the procedure flow below:
19
How many test situations are produced when the coverage type paths with test depth level 2 is
used?
A. 3
B. 8
C. 12
D. 13
Answer: D
QUESTION NO: 51
Which TMap phase may be located on the critical path?
A. Planning and Control
B. Specification
C. Execution
D. Preparation
Answer: C
20
QUESTION NO: 52
What is the correct description of the term est level?
A. the information that defines the required system behavior
B. a group of test activities with the attention of checking the information system in respect of a
number of correlated (part aspects of) quality characteristics
C. a group of test activities that are managed and executed collectively
Answer: C
QUESTION NO: 53
During which TMap phase is testing 'dynamic implicit'?
A. Specification
B. Execution
C. Preparation
Answer: B
QUESTION NO: 54
The possible results of every condition are tested at least once. To which coverage type does this
refer?
A. condition coverage
B. condition/decision coverage
C. decision coverage
D. modified condition/decision coverage
Answer: A
QUESTION NO: 55
Which test design technique can be used to test performance?
A. Data Cycle Test
B. Process Cycle Test
C. Real-Life Test
Answer: C
21
QUESTION NO: 56
See the following specification:
How many test situations can be distinguished for this specification when the coverage type
decision points modified condition/decision is used?
A. 2
B. 6
C. 8
D. 64
Answer: C
QUESTION NO: 57
During the test execution of a large customer registration system, the system went down for
several times. Although there were no test cases described the tester concluded that the continuity
was poor. Which testing method is described here?
A. dynamic explicit testing
B. dynamic implicit testing
C. static testing
Answer: B
QUESTION NO: 58
See the illustration below:
In order to test a registration application for a weekend trip, logical test cases must be created
according to the Data Combination Test. It is agreed to conduct light testing. One data pair is
defined that must be fully tested in combination:
22
* day ?attraction
Using a classification tree, six test cases are designed.
Where should the 'bullets' for test case 4 be placed?
A. Saturday, zoo, 2nd
B. Sunday, zoo, family car
C. Sunday, zoo, 2nd
Answer: C
QUESTION NO: 59
When customer data is entered, it is mandatory to specify an e-mail address. Which test design
technique can be used to test the above?
A. Data Cycle Test
B. Process Cycle Test
C. Syntactic Test
Answer: C
QUESTION NO: 60
There are two parties in the V model:
* the supplying party
* the accepting party
23
Which system development phase or test phase is not performed by the supplying party?
A. Functional design
B. Realization
C. System test
D. Technical design
Answer: D
24
See the next post for the rest of the exam questions
Email me on ayman.rayyan@hotmail.com for the LATEST pdf/word version of the questions
No comments:
Post a Comment