Visit the Below Website to access unlimited exam questions for all IT vendors and Get Oracle Certifications for FREE
http://www.free-online-exams.com
http://www.free-online-exams.com
Problem: How to Relink Oracle Database Software on UNIX
Solution:
Relinking Oracle
================
Background:
Applications for UNIX are generally not distributed as complete executables.
Oracle, like many application vendors who create products for UNIX, distribute
individual object files, library archives of object files, and some source
files which then get "relinked" at the operating system level during
installation to create usable executables. This guarantees a reliable
integration with functions provided by the OS system libraries.
Relinking occurs automatically under these circumstances:
- An Oracle product has been installed with an Oracle provided installer.
- An Oracle patch set has been applied via an Oracle provided installer.
The following information has been added to the 'Certify' section of MyOracleSupport:
General Notes For Oracle Database - Enterprise Edition:
O/S Information:
The vendors guarantee operating system binary compatibility; therefore, no
reinstall or relink of the Oracle software is required when upgrading these
operating systems unless specifically stated otherwise.
Relinking Oracle manually is suggested under the following circumstances
(even though the OS vendor may not require it):
- An OS upgrade has occurred.
- A change has been made to the OS system libraries. This can occur during
the application of an OS patch.
- A new install failed during the relinking phase.
- Individual Oracle executables core dump during initial startup.
- An individual Oracle patch has been applied (however, explicit relink
instructions are usually either included in the README or integrated into
the patch install script)
ATTENTION :
This note could not be appropriate for 11GR2 GI/ASM home's (GI : Grid Infrastructure)
you may rather refer to clusterware admin guide and/or
Note 284785.1 : How to Check Whether Oracle Binary/Instance is RAC Enabled and Relink Oracle Binary in RAC
Customers who want to (or have been advised to) manually relink should follow
the procedure below.
[Step 1] Log into the UNIX system as the Oracle software owner
==============================================================================
Typically this is the user 'oracle'.
[STEP 2] Verify that your $ORACLE_HOME is set correctly:
===============================================================================
For all Oracle Versions and Platforms, perform this basic environment check
first:
% cd $ORACLE_HOME
% pwd
...Doing this will ensure that $ORACLE_HOME is set correctly in your current
environment.
[Step 3] Verify and/or Configure the UNIX Environment for Proper Relinking:
===============================================================================
For all Oracle Versions and UNIX Platforms:
The Platform specific environment variables LIBPATH, LD_LIBRARY_PATH, &
SHLIB_PATH typically are already set to include system library locations like
'/usr/lib'. In most cases, you need only check what they are set to first,
then add the $ORACLE_HOME/lib directory to them where appropriate.
i.e.: % setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib:${LD_LIBRARY_PATH}
(see Note:131207.1 How to Set UNIX Environment Variables for help with
setting UNIX environment variables)
If on AIX with:
--------------
NOTE: Before relinking, after stopping all required processes, issue the
following as root to detach all files from memory that are not attached
to an active process:
# /usr/sbin/slibclean
Oracle 7.3.X:
- Set LIBPATH to include $ORACLE_HOME/lib
Oracle 8.0.X:
- Set LIBPATH to include $ORACLE_HOME/lib
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib and
$ORACLE_HOME/network/lib (Required when using Oracle products that
use Java)
- Set LINK_CNTRL to L_PTHREADS_D7 if using AIX 4.3. ('oslevel' verifies
OS version)
Oracle 8.1.X, 9.X.X, 10.X.X or 11.x.x:
- For 8.1.5, set LINK_CNTRL to L_PTHREADS_D7
- If not 8.1.5, ensure that LINK_CNTRL is not set
- Set LIBPATH to include $ORACLE_HOME/lib
If on DATA GENERAL AVIION (DG) with:
-----------------------------------
Oracle 7.3.X or 8.0.X:
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib
- ensure TARGET_BINARY_INTERFACE is unset
Oracle 8.1.X:
- Set LD_LIBRARY_PATH to include
$ORACLE_HOME/lib:$ORACLE_HOME/JRE/lib/PentiumPro/native_threads
If on HP-UX with:
----------------
Oracle 7.3.X, 8.0.X, 8.1.X;
- Set SHLIB_PATH to $ORACLE_HOME/lib
If using 64bit 8i Oracle, also
- Set LD_LIBRARY_PATH to $ORACLE_HOME/lib64
- ensure LPATH is unset
Oracle 9.X.X, 10.X.X or 11.x.x;
- ensure LPATH is unset
If on NCR with:
--------------
Oracle 7.3.X, 8.0.X or 8.1.X:
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib:/usr/ccs/lib
If on SCO UNIXware with:
-----------------------
Oracle 7.3.X or 8.0.X:
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib
Oracle 8.1.X:
- Set LD_LIBRARY_PATH to include
$ORACLE_HOME/lib:$ORACLE_HOME/JRE/lib/x86at/native_threads
If on SGI with:
--------------
32bit Oracle 7.3.X or 8.0.X:
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib
- Set SGI_ABI to -32
64bit Oracle 8.0.X or 8.1.X (8i is only available in 64bit):
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib
- Set SGI_ABI to -64
- If one does not already exist, create the file compiler.defaults and
set the COMPILER_DEFAULTS_PATH variable:
In the Oracle software owner's $HOME directory, create a file called
'compiler.defaults':
% cd $HOME
% echo "-DEFAULT:abi=64:isa=mips3:proc=r10k" > compiler.defaults
Then set the environment variable COMPILER_DEFAULTS_PATH to point to the
$HOME directory.
% setenv COMPILER_DEFAULTS_PATH $HOME
If this is not set, relinking will fail because the compiler defaults to
MIPS4 objects although Oracle requires MIPS3.
- Set LD_LIBRARY64_PATH to include the $ORACLE_HOME/lib and the
$ORACLE_HOME/javavm/admin directories.
- Set LD_LIBRARYN32_PATH to include the $ORACLE_HOME/lib32 directory.
NOTE: LD_LIBRARY64_PATH & LD_LIBRARYN32_PATH must be undefined when
installing software with Oracle Universal Installer.
If on SOLARIS (Sparc or Intel) with:
------------------------------------
Oracle 7.3.X, 8.0.X, or 8.1.X:
- Ensure that /usr/ccs/bin is before /usr/ucb in $PATH
% which ld ....should return '/usr/ccs/bin/ld'
If using 32bit(pre 9i) Oracle,
- Set LD_LIBRARY_PATH=$ORACLE_HOME/lib
If using 64bit(pre 9i) Oracle,
- Set LD_LIBRARY_PATH=$ORACLE_HOME/lib
- Set LD_LIBRARY_PATH_64=$ORACLE_HOME/lib64
Oracle 9.X.X or higher:
- LD_LIBRARY_PATH & LD_LIBRARY_PATH_64 do not need to be set to include
a reference to $ORACLE_HOME/lib or $ORACLE_HOME/lib64 for a generic database
software installation.
(However they should not contain a reference to the ORACLE_HOME of another Oracle version)
If on Digital/Tru64, IBM/Sequent PTX, Linux or any other UNIX Platform not
mentioned above with:
------------------------------------------------------------------------------
Oracle 7.3.X, 8.0.X, 8.1.X, 9.X.X, 10.X.X or 11.x.x:
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib
[Step 4] For all Oracle Versions and UNIX Platforms:
===============================================================================
Verify that you performed Step 2 correctly:
% env | pg ....make sure that you see the correct absolute path for
$ORACLE_HOME in the variable definitions.
[Step 5] For all Oracle Versions and UNIX Platforms:
===============================================================================
Verify umask is set correctly:
% umask
This must return 022. If it does not, set umask to 022.
% umask 022
% umask
[Step 6] Run the OS Commands to Relink Oracle:
===============================================================================
Important Note: Before relinking Oracle, shut down both the database and the
listener.
Important Note: The following commands will output a lot of text to your
session window. To capture this output for upload to support,
redirect the output to a file.
Important Note: If relinking a client installation, it's expected that some
aspects of the following commands will fail if the components
were not originally installed.
For all UNIX platforms:
Oracle 7.3.x
------------
For executables: oracle, exp, imp, sqlldr, tkprof
% cd $ORACLE_HOME/rdbms/lib
% make -f ins_rdbms.mk install
For executables: svrmgrl, svrmgrm
% cd $ORACLE_HOME/svrmgr/lib
% make -f ins_svrmgr.mk linstall minstall <- linstall is for svrmgrl, minstall is for svrmgrm For executables: sqlplus % cd $ORACLE_HOME/sqlplus/lib % make -f ins_sqlplus.mk install For executables: dbsnmp, oemevent, oratclsh % cd $ORACLE_HOME/network/lib % make -f ins_agent.mk install For executables: names, namesctl % cd $ORACLE_HOME/network/lib % make -f ins_names.mk install For executables: tnslsnr, lsnrctl, tnsping, csmnl, trceval, trcroute % cd $ORACLE_HOME/network/lib % make -f ins_network.mk install Oracle 8.0.x ------------ For executables: oracle, exp, imp, sqlldr, tkprof, mig, dbv, orapwd, rman, svrmgrl, ogms, ogmsctl % cd $ORACLE_HOME/rdbms/lib % make -f ins_rdbms.mk install For executables: sqlplus % cd $ORACLE_HOME/sqlplus/lib % make -f ins_sqlplus.mk install For executables: dbsnmp, oemevent, oratclsh, libosm.so % cd $ORACLE_HOME/network/lib % make -f ins_oemagent.mk install For executables: tnslsnr, lsnrctl, namesctl, names, osslogin, trcasst, trcroute % cd $ORACLE_HOME/network/lib % make -f ins_network.mk install Oracle 8.1.X, 9.X.X, 10.X.X or 11.X.X ------------------------------------- *** NEW IN 8i AND ABOVE *** A 'relink' script is provided in the $ORACLE_HOME/bin directory. % cd $ORACLE_HOME/bin % relink ...this will display all of the command's options. usage: relink
accepted values for parameter: all, oracle, network, client,
client_sharedlib, interMedia, precomp, utilities, oemagent, ldap
Note: ldap option is available only from 9i. In 8i, you would have to manually relink
ldap.
You can relink most of the executables associated with an Oracle Server Installation
by running the following command:
% relink all
This will not relink every single executable Oracle provides(you can
discern which executables were relinked by checking their timestamp with
'ls -l' in the $ORACLE_HOME/bin directory). However, 'relink all' will
recreate the shared libraries that most executables rely on and thereby
resolve most issues that require a proper relink.
11.2.X special instructions
--------------------------------------
In 11.2 relink script will only accept "all" as argument
-or-
Since the 'relink' command merely calls the traditional 'make' commands, you
still have the option of running the 'make' commands independently:
For executables: oracle, exp, imp, sqlldr, tkprof, mig, dbv, orapwd, rman,
svrmgrl, ogms, ogmsctl
% cd $ORACLE_HOME/rdbms/lib
% make -f ins_rdbms.mk install
NOTE: After relinking the oracle executable, make sure that the
permissions on the executable are 6751 (-rwsr-s--x). If they are
not, run the following command as the Oracle software owner:
% cd $ORACLE_HOME/bin
% chmod 6751 oracle
For executables: sqlplus
% cd $ORACLE_HOME/sqlplus/lib
% make -f ins_sqlplus.mk install
For executables: isqlplus (Oracle9i and higher versions)
% cd $ORACLE_HOME/sqlplus/lib
% make -f ins_sqlplus.mk install_isqlplus
For executables: dbsnmp, oemevent, oratclsh
% cd $ORACLE_HOME/network/lib
% make -f ins_oemagent.mk install
NOTE: After relinking the dbsnmp executable, it is necessary to run
the following commands as root (so that the ownership/permissions on
the executable are correct):
# cd $ORACLE_HOME/bin
# chown root dbsnmp
# chmod 6750 dbsnmp
@ References: Note:233559.1 and Bug:2858326
For executables: names, namesctl
% cd $ORACLE_HOME/network/lib
% make -f ins_names.mk install
For executables: osslogin, trcasst, trcroute, onrsd, tnsping
% cd $ORACLE_HOME/network/lib
% make -f ins_net_client.mk install
For executables: tnslsnr, lsnrctl
% cd $ORACLE_HOME/network/lib
% make -f ins_net_server.mk install
For executables related to ldap (for example Oracle Internet Directory):
% cd $ORACLE_HOME/ldap/lib
% make -f ins_ldap.mk install
How to Tell if Relinking Was Successful:
===============================================================================
If relinking was successful, the make command will eventually return to the OS
prompt without an error. There will NOT be a 'Relinking Successful' type
message.
If You Receive an Error Message During Relinking:
===============================================================================
Confirm that the message you received is an actual fatal error and not a
warning. Relinking errors usually terminate the relinking process and contain
verbiage similar to the following:
'Fatal error', 'Ld: fatal', 'Exit Code 1'
While warnings will look similar to: 'ld: warning: option -YP appears more than
once, first setting taken' and can most often be ignored.
If you receive an error that terminates the relinking process, your first step
should be to extract the relevant information about the error from the make
output:
This can be broken down into three basic steps:
1. Identify the OS utility that is returning the error.
'ld', 'make', 'cc', 'mv', 'cp', 'ar' are common sources.
2. Identify the type of error:
'Permission Denied', 'Undefined Symbol', 'File Not Found' are common types.
3. Identify the files or symbols involved.
Using the information from above as keywords, search Oracle's Metalink
repository ( http://metaLink.oracle.com ) for previous occurrences of the same
error. If no previous occurrences are found or a solution is not provided,
generate an iTAR that includes the complete error text.
Help setting environment variables.
==============================================================================
See Note:131207.1 How to Set UNIX Environment Variables
for help with setting UNIX environment variables.
Relinking with Orainst:
===============================================================================
For Oracle7 & Oracle8 only, the following document illustrates how to relink
with the 'orainst' utility:
Note:1032747.6 HOW TO RELINK ORACLE USING THE 7.3.X INSTALLER
While 'orainst' will run the same commands as [Step 4], performing [Step 4]
manually from a UNIX shell is the preferred approach.
References:
How to Relink Oracle Database Software on UNIX [ID 131321.1]
NOTE:284785.1 - How to Check Whether Oracle Binary/Instance is RAC Enabled and Relink Oracle Binary in RAC
Solution:
Relinking Oracle
================
Background:
Applications for UNIX are generally not distributed as complete executables.
Oracle, like many application vendors who create products for UNIX, distribute
individual object files, library archives of object files, and some source
files which then get "relinked" at the operating system level during
installation to create usable executables. This guarantees a reliable
integration with functions provided by the OS system libraries.
Relinking occurs automatically under these circumstances:
- An Oracle product has been installed with an Oracle provided installer.
- An Oracle patch set has been applied via an Oracle provided installer.
The following information has been added to the 'Certify' section of MyOracleSupport:
General Notes For Oracle Database - Enterprise Edition:
O/S Information:
The vendors guarantee operating system binary compatibility; therefore, no
reinstall or relink of the Oracle software is required when upgrading these
operating systems unless specifically stated otherwise.
Relinking Oracle manually is suggested under the following circumstances
(even though the OS vendor may not require it):
- An OS upgrade has occurred.
- A change has been made to the OS system libraries. This can occur during
the application of an OS patch.
- A new install failed during the relinking phase.
- Individual Oracle executables core dump during initial startup.
- An individual Oracle patch has been applied (however, explicit relink
instructions are usually either included in the README or integrated into
the patch install script)
ATTENTION :
This note could not be appropriate for 11GR2 GI/ASM home's (GI : Grid Infrastructure)
you may rather refer to clusterware admin guide and/or
Note 284785.1 : How to Check Whether Oracle Binary/Instance is RAC Enabled and Relink Oracle Binary in RAC
Customers who want to (or have been advised to) manually relink should follow
the procedure below.
[Step 1] Log into the UNIX system as the Oracle software owner
==============================================================================
Typically this is the user 'oracle'.
[STEP 2] Verify that your $ORACLE_HOME is set correctly:
===============================================================================
For all Oracle Versions and Platforms, perform this basic environment check
first:
% cd $ORACLE_HOME
% pwd
...Doing this will ensure that $ORACLE_HOME is set correctly in your current
environment.
[Step 3] Verify and/or Configure the UNIX Environment for Proper Relinking:
===============================================================================
For all Oracle Versions and UNIX Platforms:
The Platform specific environment variables LIBPATH, LD_LIBRARY_PATH, &
SHLIB_PATH typically are already set to include system library locations like
'/usr/lib'. In most cases, you need only check what they are set to first,
then add the $ORACLE_HOME/lib directory to them where appropriate.
i.e.: % setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib:${LD_LIBRARY_PATH}
(see Note:131207.1 How to Set UNIX Environment Variables for help with
setting UNIX environment variables)
If on AIX with:
--------------
NOTE: Before relinking, after stopping all required processes, issue the
following as root to detach all files from memory that are not attached
to an active process:
# /usr/sbin/slibclean
Oracle 7.3.X:
- Set LIBPATH to include $ORACLE_HOME/lib
Oracle 8.0.X:
- Set LIBPATH to include $ORACLE_HOME/lib
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib and
$ORACLE_HOME/network/lib (Required when using Oracle products that
use Java)
- Set LINK_CNTRL to L_PTHREADS_D7 if using AIX 4.3. ('oslevel' verifies
OS version)
Oracle 8.1.X, 9.X.X, 10.X.X or 11.x.x:
- For 8.1.5, set LINK_CNTRL to L_PTHREADS_D7
- If not 8.1.5, ensure that LINK_CNTRL is not set
- Set LIBPATH to include $ORACLE_HOME/lib
If on DATA GENERAL AVIION (DG) with:
-----------------------------------
Oracle 7.3.X or 8.0.X:
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib
- ensure TARGET_BINARY_INTERFACE is unset
Oracle 8.1.X:
- Set LD_LIBRARY_PATH to include
$ORACLE_HOME/lib:$ORACLE_HOME/JRE/lib/PentiumPro/native_threads
If on HP-UX with:
----------------
Oracle 7.3.X, 8.0.X, 8.1.X;
- Set SHLIB_PATH to $ORACLE_HOME/lib
If using 64bit 8i Oracle, also
- Set LD_LIBRARY_PATH to $ORACLE_HOME/lib64
- ensure LPATH is unset
Oracle 9.X.X, 10.X.X or 11.x.x;
- ensure LPATH is unset
If on NCR with:
--------------
Oracle 7.3.X, 8.0.X or 8.1.X:
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib:/usr/ccs/lib
If on SCO UNIXware with:
-----------------------
Oracle 7.3.X or 8.0.X:
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib
Oracle 8.1.X:
- Set LD_LIBRARY_PATH to include
$ORACLE_HOME/lib:$ORACLE_HOME/JRE/lib/x86at/native_threads
If on SGI with:
--------------
32bit Oracle 7.3.X or 8.0.X:
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib
- Set SGI_ABI to -32
64bit Oracle 8.0.X or 8.1.X (8i is only available in 64bit):
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib
- Set SGI_ABI to -64
- If one does not already exist, create the file compiler.defaults and
set the COMPILER_DEFAULTS_PATH variable:
In the Oracle software owner's $HOME directory, create a file called
'compiler.defaults':
% cd $HOME
% echo "-DEFAULT:abi=64:isa=mips3:proc=r10k" > compiler.defaults
Then set the environment variable COMPILER_DEFAULTS_PATH to point to the
$HOME directory.
% setenv COMPILER_DEFAULTS_PATH $HOME
If this is not set, relinking will fail because the compiler defaults to
MIPS4 objects although Oracle requires MIPS3.
- Set LD_LIBRARY64_PATH to include the $ORACLE_HOME/lib and the
$ORACLE_HOME/javavm/admin directories.
- Set LD_LIBRARYN32_PATH to include the $ORACLE_HOME/lib32 directory.
NOTE: LD_LIBRARY64_PATH & LD_LIBRARYN32_PATH must be undefined when
installing software with Oracle Universal Installer.
If on SOLARIS (Sparc or Intel) with:
------------------------------------
Oracle 7.3.X, 8.0.X, or 8.1.X:
- Ensure that /usr/ccs/bin is before /usr/ucb in $PATH
% which ld ....should return '/usr/ccs/bin/ld'
If using 32bit(pre 9i) Oracle,
- Set LD_LIBRARY_PATH=$ORACLE_HOME/lib
If using 64bit(pre 9i) Oracle,
- Set LD_LIBRARY_PATH=$ORACLE_HOME/lib
- Set LD_LIBRARY_PATH_64=$ORACLE_HOME/lib64
Oracle 9.X.X or higher:
- LD_LIBRARY_PATH & LD_LIBRARY_PATH_64 do not need to be set to include
a reference to $ORACLE_HOME/lib or $ORACLE_HOME/lib64 for a generic database
software installation.
(However they should not contain a reference to the ORACLE_HOME of another Oracle version)
If on Digital/Tru64, IBM/Sequent PTX, Linux or any other UNIX Platform not
mentioned above with:
------------------------------------------------------------------------------
Oracle 7.3.X, 8.0.X, 8.1.X, 9.X.X, 10.X.X or 11.x.x:
- Set LD_LIBRARY_PATH to include $ORACLE_HOME/lib
[Step 4] For all Oracle Versions and UNIX Platforms:
===============================================================================
Verify that you performed Step 2 correctly:
% env | pg ....make sure that you see the correct absolute path for
$ORACLE_HOME in the variable definitions.
[Step 5] For all Oracle Versions and UNIX Platforms:
===============================================================================
Verify umask is set correctly:
% umask
This must return 022. If it does not, set umask to 022.
% umask 022
% umask
[Step 6] Run the OS Commands to Relink Oracle:
===============================================================================
Important Note: Before relinking Oracle, shut down both the database and the
listener.
Important Note: The following commands will output a lot of text to your
session window. To capture this output for upload to support,
redirect the output to a file.
Important Note: If relinking a client installation, it's expected that some
aspects of the following commands will fail if the components
were not originally installed.
For all UNIX platforms:
Oracle 7.3.x
------------
For executables: oracle, exp, imp, sqlldr, tkprof
% cd $ORACLE_HOME/rdbms/lib
% make -f ins_rdbms.mk install
For executables: svrmgrl, svrmgrm
% cd $ORACLE_HOME/svrmgr/lib
% make -f ins_svrmgr.mk linstall minstall <- linstall is for svrmgrl, minstall is for svrmgrm For executables: sqlplus % cd $ORACLE_HOME/sqlplus/lib % make -f ins_sqlplus.mk install For executables: dbsnmp, oemevent, oratclsh % cd $ORACLE_HOME/network/lib % make -f ins_agent.mk install For executables: names, namesctl % cd $ORACLE_HOME/network/lib % make -f ins_names.mk install For executables: tnslsnr, lsnrctl, tnsping, csmnl, trceval, trcroute % cd $ORACLE_HOME/network/lib % make -f ins_network.mk install Oracle 8.0.x ------------ For executables: oracle, exp, imp, sqlldr, tkprof, mig, dbv, orapwd, rman, svrmgrl, ogms, ogmsctl % cd $ORACLE_HOME/rdbms/lib % make -f ins_rdbms.mk install For executables: sqlplus % cd $ORACLE_HOME/sqlplus/lib % make -f ins_sqlplus.mk install For executables: dbsnmp, oemevent, oratclsh, libosm.so % cd $ORACLE_HOME/network/lib % make -f ins_oemagent.mk install For executables: tnslsnr, lsnrctl, namesctl, names, osslogin, trcasst, trcroute % cd $ORACLE_HOME/network/lib % make -f ins_network.mk install Oracle 8.1.X, 9.X.X, 10.X.X or 11.X.X ------------------------------------- *** NEW IN 8i AND ABOVE *** A 'relink' script is provided in the $ORACLE_HOME/bin directory. % cd $ORACLE_HOME/bin % relink ...this will display all of the command's options. usage: relink
accepted values for parameter: all, oracle, network, client,
client_sharedlib, interMedia, precomp, utilities, oemagent, ldap
Note: ldap option is available only from 9i. In 8i, you would have to manually relink
ldap.
You can relink most of the executables associated with an Oracle Server Installation
by running the following command:
% relink all
This will not relink every single executable Oracle provides(you can
discern which executables were relinked by checking their timestamp with
'ls -l' in the $ORACLE_HOME/bin directory). However, 'relink all' will
recreate the shared libraries that most executables rely on and thereby
resolve most issues that require a proper relink.
11.2.X special instructions
--------------------------------------
In 11.2 relink script will only accept "all" as argument
-or-
Since the 'relink' command merely calls the traditional 'make' commands, you
still have the option of running the 'make' commands independently:
For executables: oracle, exp, imp, sqlldr, tkprof, mig, dbv, orapwd, rman,
svrmgrl, ogms, ogmsctl
% cd $ORACLE_HOME/rdbms/lib
% make -f ins_rdbms.mk install
NOTE: After relinking the oracle executable, make sure that the
permissions on the executable are 6751 (-rwsr-s--x). If they are
not, run the following command as the Oracle software owner:
% cd $ORACLE_HOME/bin
% chmod 6751 oracle
For executables: sqlplus
% cd $ORACLE_HOME/sqlplus/lib
% make -f ins_sqlplus.mk install
For executables: isqlplus (Oracle9i and higher versions)
% cd $ORACLE_HOME/sqlplus/lib
% make -f ins_sqlplus.mk install_isqlplus
For executables: dbsnmp, oemevent, oratclsh
% cd $ORACLE_HOME/network/lib
% make -f ins_oemagent.mk install
NOTE: After relinking the dbsnmp executable, it is necessary to run
the following commands as root (so that the ownership/permissions on
the executable are correct):
# cd $ORACLE_HOME/bin
# chown root dbsnmp
# chmod 6750 dbsnmp
@ References: Note:233559.1 and Bug:2858326
For executables: names, namesctl
% cd $ORACLE_HOME/network/lib
% make -f ins_names.mk install
For executables: osslogin, trcasst, trcroute, onrsd, tnsping
% cd $ORACLE_HOME/network/lib
% make -f ins_net_client.mk install
For executables: tnslsnr, lsnrctl
% cd $ORACLE_HOME/network/lib
% make -f ins_net_server.mk install
For executables related to ldap (for example Oracle Internet Directory):
% cd $ORACLE_HOME/ldap/lib
% make -f ins_ldap.mk install
How to Tell if Relinking Was Successful:
===============================================================================
If relinking was successful, the make command will eventually return to the OS
prompt without an error. There will NOT be a 'Relinking Successful' type
message.
If You Receive an Error Message During Relinking:
===============================================================================
Confirm that the message you received is an actual fatal error and not a
warning. Relinking errors usually terminate the relinking process and contain
verbiage similar to the following:
'Fatal error', 'Ld: fatal', 'Exit Code 1'
While warnings will look similar to: 'ld: warning: option -YP appears more than
once, first setting taken' and can most often be ignored.
If you receive an error that terminates the relinking process, your first step
should be to extract the relevant information about the error from the make
output:
This can be broken down into three basic steps:
1. Identify the OS utility that is returning the error.
'ld', 'make', 'cc', 'mv', 'cp', 'ar' are common sources.
2. Identify the type of error:
'Permission Denied', 'Undefined Symbol', 'File Not Found' are common types.
3. Identify the files or symbols involved.
Using the information from above as keywords, search Oracle's Metalink
repository ( http://metaLink.oracle.com ) for previous occurrences of the same
error. If no previous occurrences are found or a solution is not provided,
generate an iTAR that includes the complete error text.
Help setting environment variables.
==============================================================================
See Note:131207.1 How to Set UNIX Environment Variables
for help with setting UNIX environment variables.
Relinking with Orainst:
===============================================================================
For Oracle7 & Oracle8 only, the following document illustrates how to relink
with the 'orainst' utility:
Note:1032747.6 HOW TO RELINK ORACLE USING THE 7.3.X INSTALLER
While 'orainst' will run the same commands as [Step 4], performing [Step 4]
manually from a UNIX shell is the preferred approach.
References:
How to Relink Oracle Database Software on UNIX [ID 131321.1]
NOTE:284785.1 - How to Check Whether Oracle Binary/Instance is RAC Enabled and Relink Oracle Binary in RAC
No comments:
Post a Comment